Frequent question: Do you have to use the bottom bobbin?

Do you have to use a bobbin in sewing?

Without a sewing machine, a bobbin has the same role as any spool of thread. However, a bobbin is an incredibly important piece of a sewing machine. … Together, the two threads create the stitching. Although you can learn how to wind a bobbin by hand, many sewing machines also have a bobbin winder mechanism.

Does it matter which bobbin I use?

Bobbins not only come in different sizes, but also in metal as well as plastic, and empty as well as pre-wound. While machines can only use one bobbin size, whether it is plastic or metal does not typically matter, however consult your machine manual to be sure.

Can you use an uneven bobbin?

If you use the wrong size, your bobbin might not wind evenly, and you’ll have problems with uneven stitches when you’re sewing.

What is the point of bobbin?

As used in spinning, weaving, knitting, sewing, or lacemaking, the bobbin provides temporary or permanent storage for yarn or thread and may be made of plastic, metal, bone, or wood.

What is the difference between bobbin thread and regular thread?

Machine embroidery bobbin thread is different from regular thread. … Typically, it is either 60 or 90 weight, whereas standard embroidery thread is typically 40 weight. And, a higher weight number means a thinner thread. Another difference is that machine embroidery bobbin thread typically only comes in white.

IT\'S FUN:  Best answer: Is Lilo and Stitch 2 after the series?

What happens if you use the wrong bobbin?

The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.

Which is better plastic or metal bobbins?

If you try to place a metal bobbin in a plastic bobbin case you may see that the bobbin case wears out a lot faster than it is supposed to. That will cost you more money than you are ready to spend. While metal is always better than plastic, it is just not a universal sewing material that has unlimited uses.

Why is my thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Why is my bobbin not catching?

Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.