Why is so much thread coming from bobbin?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why is my sewing machine gathering thread underneath?
Your Thread Tension Is Too Tight
Sewing machine manufacturers suggest that you don’t mess with your bobbin thread tension too much, but you should adjust your upper thread tension if you keep getting bunched up thread underneath your fabric. If your tension is too tight, it can pull your thread and break it.
The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.
How do you fix bobbin tension?
Bobbin tension or bottom tension is fixed by adjusting a small screw next to your bobbin case’s thread opening.To adjust, use a tiny screwdriver and turn the tiny screw to the right for tighter tension or the left to loosen bobbin tension.