Why does my sewing machine keep locking up?
Thread bunched up in the shuttle race often causes the sewing machine to lock up. … Clean lint and debris out of the shuttle race; they can prevent the needle from hooking the thread, resulting in thread bunching up in the shuttle race and jamming the needle.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why won’t my sewing machine go up and down?
A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. If the drive belt is okay, an internal drive gear failure is likely preventing the needle from moving. …
The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.
How do you fix bobbin tension?
Bobbin tension or bottom tension is fixed by adjusting a small screw next to your bobbin case’s thread opening.To adjust, use a tiny screwdriver and turn the tiny screw to the right for tighter tension or the left to loosen bobbin tension.