Do I put the bobbin thread through the needle?

Does the bobbin thread need to go through the needle?

Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly, otherwise the thread may break or the thread tension will be incorrect. The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case.

Why won’t my needle catch the bobbin thread?

If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.

Why is my bobbin thread not catching?

Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.

Why is my thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

IT\'S FUN:  What is MJS yarn?

What weight is embroidery bobbin thread?

Machine embroidery bobbin thread is different from regular thread. First of all, It is a lot thinner. Typically, it is either 60 or 90 weight, whereas standard embroidery thread is typically 40 weight. And, a higher weight number means a thinner thread.