Frequent question: How do you make a fabric tab curtain?

How much fabric do I need for tab curtains?

1. Cut the Panel Fabric. The length and width of your curtain panels will depend on the size and placement of the windows, plus the hem allowances. To figure out how much fabric to use for your panels, estimate that you’ll need about 1½ to 2 times the fullness of your window.

How do you measure fabric for tab top curtains?

How to Measure: Tab Top Curtains

  1. Measure Length. Measure from the top of the rod down to where you want the curtain to fall. …
  2. Measure Width. The curtain width should measure 1 ½ the width of the window for fullness.
  3. Styling Tip. We suggest a decorative curtain rod because the rod will be visible between tabs.

How do I calculate curtain material?

There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).

How do I calculate how much fabric I need for curtains?

How much fabric do I need to make curtains?

  1. First, you will need to multiply the width of your rail by two.
  2. Divide this by the cut width of your fabric i.e 137cm/ 54”.
  3. Round up to the nearest full number, this is the amount of widths you need.
IT\'S FUN:  Are braids or weaves better for your hair?

Are tab top curtains easy to open?

Opening and closing tabbed curtains is a bit more difficult than with rings, as rings slide easily along the rod. With rings, the upper part of the window casing or trim is usually visible because they hang down from the rod.

How do you make curtains for beginners?

How to Make Curtains

  1. 1.Measure. If you’ve ever done a DIY, you probably know at this point that the first step is to measure—and that you should really measure twice before making the first cut! …
  2. Cut fabric. …
  3. Pin and sew one side. …
  4. Create lining hem. …
  5. Sew second side. …
  6. Flip curtain right-side out. …
  7. Create rod pocket. …
  8. Iron.

What are back tabs on curtains?

Back tab curtains consist of loops of fabric on the backs of the panels to create a clean, tailored look. You can either slide these loops directly onto the curtain rod or attach rings with clips to the loops to enhance its look. Back tab curtains work especially well if you don’t want to display the curtain rod.

How do you line tab top curtains?

Place the facing on the top of the curtain panel (also on top of the tabs), with raw edges at the top. Line up the sides as well and pin in place. following the creases of the panel. Fold the facing down on the wrong side of the panel, and iron flat.