How do you use the zigzag stitch on a Brother sewing machine?

What tension should I use for zig-zag stitch?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

Why is my sewing machine not sewing zig-zag stitches?

Make sure that the thread is in the tension disk and the spool is placed correctly on the machine. Also, double-check to see if the bobbin is in the correct way and threaded tightly. Sometimes, a poorly wound bobbin is the culprit for skipped stitches. Good quality thread also plays a part in nice and even stitching.

Why does my zig zag stitch go straight?

If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.

What should the tension be on a Brother sewing machine?

a. The tension dial should be set between 2 to 6. b. When the upper thread is just visible on the back of the fabric, the thred tension is correct.

IT\'S FUN:  Can you hem without a sewing machine?

What is a normal stitch length?

The average stitch length for mid-weight fabrics is 2.5 to 3 mm/10 to 12 spi. The average stitch length for fine fabrics is 2 mm/13 to 20 spi. For heavier fabrics, basting, or topstitching, use 4 to 5 mm/5 to 6 spi.

Can you zigzag with a walking foot?

Yes, you can use your walking foot for more than straight stitching. A zig-zag stitch should be just fine because all the movement in the stitch pattern is forward. In fact many of the decorative stitches on your sewing machine are just fine to use with your even feed foot installed.