What numbers should my sewing machine be on?
A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.
What is the best stitch to use for cotton?
You can sew cotton with the regular straight seams – set the stitch length at 2.0 or 2.5. 2.5 is good for medium weight fabrics but for finer cotton use a shorter stitch like 1.5 or 2. For cotton cut on the bias ( which stretch) use a short zig-zag stitch,for its stretch.
What tension should sewing machine be?
What is Perfect Sewing Machine Tension? Perfect sewing machine tension occurs when the top and bottom threads are perfectly balanced. That means you shouldn’t see any little loops on either the top or bottom of your fabric and the stitching should look even on both sides.
What is the normal tension setting on a Singer sewing machine?
The target figure should be around 30 to 40g. (1-1/4 to 1-1/2 oz) but it does not have to be too precise. However most people don’t have a spring balance handy, so alternatively you can tie a weight of the correct amount onto the thread and then jerk the bobbin gently upwards.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
What width should I use for cotton?
For heavyweight cotton, use needle size 90/14 -100/16 or denim type needles with a stitch width of 2-2.5 (Sewing denim). Medium weight fits into the average category needle size 70/10 – 80/12 and a stitch width of 2 – 2.5. Lightweight needs a finer needle 60/80 – 70/10 and stitch width 1.5 – 2.
What is the most common use for the zigzag stitch?
One of the most common uses for the zigzag stitch is to sew stretchy materials. When sewing a material that stretches, such as knitted fabrics and neoprene, it’s essential to use a stitch that can stretch with the fabric.
What tension should I use for stretchy fabric?
Tension: For loftier knits or stable knits, like ponte or scuba knit fabrics, try a lower tension around 2 or 3. Around 4 is usually good for heavyweight knits. The 4-5 Tension range generally yields the best results with light to medium weight knits.
How do I know if my bobbin tension is correct?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.