What causes looped stitches?
If the top thread or bobbin thread is improperly threaded it can cause looping stitches. If your machine is threaded correctly, check the thread tension. Loose thread tension will create loose loops of thread that can cause the needle to catch and create more of a mess.
Why is my Singer sewing machine looping underneath?
Thread looping on the underside of the fabric is always an indication that the upper thread is not correctly threaded. This happens when the upper thread is not correctly placed in the tension mechanism and has not been threaded through the take-up lever.
Why does my thread bunch up when I start to sew?
Your Thread Tails Are Too Short
If the thread tails that come out of your bobbin are shorter than two inches, they may get sucked into your sewing machine when you begin to sew. This can cause thread bunching underneath your fabric. … This is especially important if you’re sewing with knit fabric.
The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
How do you fix bobbin tension?
Bobbin tension or bottom tension is fixed by adjusting a small screw next to your bobbin case’s thread opening.To adjust, use a tiny screwdriver and turn the tiny screw to the right for tighter tension or the left to loosen bobbin tension.
How do I stop my sewing machine from bunching up?
A good cleaning may solve your bunching woes (check your manual for guidelines on cleaning and maintenance; your machine may also need to be oiled). To prevent stitch glitches, be sure to frequently dust underneath the throat plate and along the thread path, and to periodically clean and oil your machine.