Why is it necessary to stay stitch the waistline?

Why is stay stitching important?

The purpose of staystitching is to maintain those grainlines. That’s extra important with curved pieces like necklines and armholes that are cut on the bias (off-grain). Because these pieces are stretchier, their fibers are more likely to get distorted during handling and sewing.

Why is there a need to stay stitch curved edges?

Staystitching is a straight stitch sewn through one layer of fabric. It’s most often used around a curve to prevent distortion. This is because the curve cuts across the bias, the stretchiest part of fabric.

Is Stay stitch basting?

Sewing the stay stitching in a certain direction is referred to as directional stitching. The intent is to keep the shape of the fabric the same as it was when you cut it out. … Unlike basting or ease stitches, stay stitching is not removed.

When would you use a basting stitch?

Basting stitches are used to temporarily hold fabrics together, for example, when you want to check the fit of a garment before sewing the actual seam. Select the Basting Stitch. It is helpful to also slightly reduce the upper thread tension as well (this makes it easier to remove the temporary basting stitches later).

What is a gathering stitch?

Gathering is a sewing technique for shortening the length of a strip of fabric so that the longer piece can be attached to a shorter piece. … In simple gathering, parallel rows of running stitches are sewn along one edge of the fabric to be gathered.

IT\'S FUN:  Why is weaving important in culture?

What is a overlock stitch?

An overlock is a kind of stitch that sews over the edge of one or two pieces of cloth for edging, hemming, or seaming. Usually an overlock sewing machine will cut the edges of the cloth as they are fed through (such machines being called sergers in North America), though some are made without cutters.

Do you remove basting stitches?

Always use care when removing basting stitches. Gently loosen the stitches with a seam ripper, working from one side of the fabric to the other. Don’t poke the seam ripper between the layers of fabric, as that increases the likelihood of ripping through the fabric.