Quick Answer: How do you sew a bobbin without a stitch?

Why does my sewing have looping underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

How much thread do you put on a bobbin?

Unwind about 18″ or so of thread and bring it around the backside of the bobbin winder tension disc, wind it around the tension disc one time. Some machines might have a thread guide before this step- if yours does, don’t skip it! Be sure to place your thread through all the thread guides on your machine.

How do you spin a bobbin thread?

Serger Help

  1. Place spool of thread on spool pin. …
  2. Pass thread end, from inside, through the small hole in the rim of the bobbin (illustration 2).
  3. Place bobbin onto the pin. …
  4. Holding thread end, step on speed controller to run the machine until the desired amount of thread is wound. …
  5. Trim thread ends from top of the bobbin.
IT\'S FUN:  Is sewing machine oil the same as clock oil?

Can you wind a bobbin without a sewing machine?

Bobbin Winder Thingy … Yes! And wouldn’t you know it – one of the first things I saw was that little bobbin winder device (it’s called a SideWinder) that you can use to wind a bobbin thread without a sewing machine.

Why can’t I wind my bobbin?

If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.

What holds the bobbin while it winds?

Bobbin spindle– holds the bobbin while it winds. Bobbin winder tension- provides tension on the thread when the bobbin winds.

How do you fix bobbin tension?

Bobbin tension or bottom tension is fixed by adjusting a small screw next to your bobbin case’s thread opening.To adjust, use a tiny screwdriver and turn the tiny screw to the right for tighter tension or the left to loosen bobbin tension.

Why is my sewing machine not stitching underneath?

The most common cause of a sewing machine skipping stitches is using the wrong type of needle for the fabric you are sewing. … Skipped stitches can also result if the needle is bent, which can occur if you are forcing the fabric, rather than let the machine feed it automatically.

Why does my bottom thread keep jamming?

The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.

IT\'S FUN:  Frequent question: When should I take out my weave?