How do you fix a presser foot holder?
Turn the screw toward the back of the machine (counterclockwise). Remove the presser foot holder. Align the presser foot holder with the lower-left side of the presser bar. Hold the presser foot holder in place with your right hand, and then tighten the screw using the screwdriver in your left hand.
What should you do if the take up lever is not visible?
How to thread the take up lever when it does not come out of the…
- Raise the needle to its highest position by turning the hand wheel toward you.
- Make sure the mark on the hand wheel points up, or just press the needle position button twice to raise the needle.
Locate your reverse stitch knob, button or switch. Reverse stitch mechanisms are most often located on the front of your machine, either on the center of the faceplate, above the needle or on the left-most front.
How do you adjust the presser foot pressure on a Brother sewing machine?
The pressure of the presser foot can be adjusted by turning the pressure adjustment screw at the top left of this machine. Since this machine has already been adjusted to a pressure suitable for light to medium fabrics, no further adjustment is necessary except when sewing on very heavy or very light materials.
What controls the movement of the needle and the take up lever?
7. Hand wheel controls the movement of the take up lever and needle; can be controlled by power or by hand; should ALWAYS be turned toward you.