Why is the thread bunching up when I sew?

Why does my sewing machine keep jamming underneath?

However certain you are that the problem with the machine is most likely due to a huge tangled mess of thread in the bobbin underneath the fabric, the most common reason for the jamming is usually the lack of sufficient tension in the upper thread.

How do you fix bobbin tension?

Bobbin tension or bottom tension is fixed by adjusting a small screw next to your bobbin case’s thread opening.To adjust, use a tiny screwdriver and turn the tiny screw to the right for tighter tension or the left to loosen bobbin tension.

What width should my sewing machine be on?

A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.

How do you tighten thread tension?

Changing Bobbin Tension

You should see a small screw on the flat/closed side of the bobbin case. Turning the screw a tiny bit counterclockwise will loosen the bobbin tension; turning it clockwise will tighten the tension.

IT\'S FUN:  Best answer: Should I get all my clothes tailored?