What is the best stitch width for sewing a straight stitch?
A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.
What is maximum stitch width?
All machines measure the stitch width in millimeters (mm). Some makes and models have a maximum stitch width of 4 to 6 mm. Others create stitches as wide as 9 mm. … When it comes to decorative stitches, it usually is.
Why is my straight stitch sewing zigzag?
If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
What is a normal stitch length?
The average stitch length for mid-weight fabrics is 2.5 to 3 mm/10 to 12 spi. The average stitch length for fine fabrics is 2 mm/13 to 20 spi. For heavier fabrics, basting, or topstitching, use 4 to 5 mm/5 to 6 spi.
What are the settings for a straight stitch on a sewing machine?
The settings for straight stitching are as follows.
- Set the stitch length to F-4.
- Set the stitch width at 0.
- The needle position can be set to M (Middle), L (Left), or R (Right). – For twin needle sewing, always set at M.
- Install the zigzag presser foot.