Which direction should the bobbin turn when inside the bobbin case?
The bobbin should be turning clockwise when thread is pulled. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle. 5. Holding the bobbin case by the latch, fully insert the bobbin case into the shuttle race and release the latch.
Why is the bobbin thread showing on top?
If the bobbin thread is on top, that means the top thread is pulling more, or, has more tension. That means either the top thread is too tight or the bobbin thread is too loose.
Does bobbin direction matter?
Make sure the bobbin thread unrolls in the correct direction when installing the bobbin into the bobbin case. … If the thread unrolls in the wrong direction, the needle may break or the thread tension will be incorrect. Use a bobbin that has been correctly wound with thread.
Does it matter what color thread is on the bobbin?
You can use whatever color you want, but you don’t need to change color to match the top thread. Your bobbin thread should not show through the top layer of stitching. … You will always want to use a lightweight polyester bobbin thread, such as BobbinFil or any other 60-70 weight thread.
Should bobbin thread go through needle?
The thread enters the tension spring of the bobbin case. Pass the bobbin thread through the slot. Do not cut the thread with the cutter. While lightly holding the upper thread with your left hand, press (Needle position button) twice to lower and then raise the needle.
How do I know if my bobbin tension is correct?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
Why is my bobbin thread not catching?
Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
Can you use embroidery thread as bobbin thread?
Machine embroidery bobbin thread is different from regular thread. First of all, It is a lot thinner. Typically, it is either 60 or 90 weight, whereas standard embroidery thread is typically 40 weight.
How do you fix bobbin tension?
Bobbin tension or bottom tension is fixed by adjusting a small screw next to your bobbin case’s thread opening.To adjust, use a tiny screwdriver and turn the tiny screw to the right for tighter tension or the left to loosen bobbin tension.