How do you load a bobbin thread?

How do you thread the bottom bobbin?

Hold the top thread to the left and lower the needle (blue arrow) with the hand wheel on the side of the sewing machine. Raise the needle (blue arrow) with the hand wheel, and you will see the bobbin thread (red arrow) get pulled in a little. Gently pull the top thread. This will bring the bobbin thread (red arrow) up.

How do you manually pick up a bobbin thread?

With your right hand, turn the balance wheel toward you (counterclockwise) until the needle moves down and back up again to its highest position. The upper thread should have caught the lower thread in a loop. Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop.

Why is my thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Why is my bobbin thread not catching?

Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.

IT\'S FUN:  You asked: Why are my knit stitches twisted?

Does bobbin direction matter?

Make sure the bobbin thread unrolls in the correct direction when installing the bobbin into the bobbin case. … If the thread unrolls in the wrong direction, the needle may break or the thread tension will be incorrect. Use a bobbin that has been correctly wound with thread.