How do you remove the bobbin from a sewing machine?

Why can’t I pull the bobbin thread up?

First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Make sure the presser foot is up when seating the thread through the upper tension.

How do I know if I need a new bobbin case?

A quarter of a turn is a lot. Again, you only need to worry about the bobbin tension if the factory set bobbin tension isn’t creating a balanced stitch. As long as you take good care of your bobbin case, it will perform well. However, eventually, it will cease to sew smoothly and will need to be replaced.

Why is my thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

What happens if you use the wrong bobbin?

The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.

IT\'S FUN:  Can you embroider on any fabric?

Do all sewing machines use the same bobbins?

There is no such thing as a universal bobbin, meaning no single bobbin will fit every sewing machine. Some sewing machines tolerate a slightly different bobbin better than others, but using the incorrect bobbin will most likely affect the stitch quality of your project, and could result in damage to your machine.