Your question: Why is my bobbin thread not tight?

Why is my bobbin not tight?

If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.

Why is bottom stitch loose?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight

Sewing machine manufacturers suggest that you don’t mess with your bobbin thread tension too much, but you should adjust your upper thread tension if you keep getting bunched up thread underneath your fabric. If your tension is too tight, it can pull your thread and break it.

Why does my bottom thread keep jamming?

The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.

IT\'S FUN:  Are Juki home sewing machines good?

Why is my bottom stitch not straight?

If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.

Why is my top thread so tight?

If the bobbin thread was incorrectly threaded, the upper thread may be too tight. … If the upper thread was incorrectly threaded, the upper thread may be too loose. 4. To increase the upper tension – increase the tension setting or turn the knob to the right.